50 Years Experience

Toll Free: 877-659-8040
Phone: 918-486-8411
Fax: 918-486-8412
Email: coyotesales@tulsacoxmail.com                                             Find us on Facebook

27301 E 121ST Street
Coweta, OK 74429 USA
Made in America Coyote-logo Coyote-logo-2

 

 

 

 

 

Parts and Machinery for the Abrasive Blast Industry

3 Cubic Foot Airless Blast Machine

 3 Cubic Foot airless blast machine

Features:

  • 400 LB. Load Capacity
  • 10 HP Direct Drive Blast Wheel
  • Small Operating Footprint
  • 3 Phase Operation
  • Continuous Molded Rubber Belt
  • Low Noise Level
  • Low Profile Design
  • Safety Interlocks
  • Reversing Mill
  • Automatic Timer Controls
  • Machine Warranty
  • Standard Color is Coyote

Coyote Centrifugal Blast Wheel

Wheel:

3600 RPM, 14" or 15" direct drive, bi-directional blast wheel for maximum abrasive velocity and smooth operation.

Blades:

Exclusive Rim-Loc design ensures easy replacement of long life, abrasive resistant, alloy blades.

Control Cage:

Dial Type Cage
Wheel Housing: Fabricated from 1/4"steel plate and protected by replaceable cast alloy steel liners.

Cabinet Construction

Cabinet: Low profile, formed to maintain structural integrity and fabricated from 1/4"steel plate; access holes in sides of cabinet simplify belt replacement and rear access door permits easy removal of tramp metal from screens.
Conveyor: 4-ply construction, continuous molded rubber tumble belt with 1/4" diameter abrasive drain holes. Rubber tumbling ridges are molded directly onto the belt, screw adjusted take-ups provide positive belt adjustment.
Conveyor Rollers: Rollers have 1 7/16" diameter shafts and are mounted to the cabinet with standard (4) bolt flange bearings.
Conveyor Speed: 14 feet per minute.
Work Loading Height: 42"
Work Load Capacity: 31" x 24" diameter mill will handle 3 cubic feet or 400 pounds.
Cabinet Door: Pneumatically operated, reinforced rubber door provides full access to blast chamber and is positively sealed from abrasive and dust leakage.

Power and Air Requirements

Nema: Type 12 electrical enclosure, optional 230 or 460 volt, 3 phase, thermal overload protection for all motors, Ammeter, oil tight push button controls and timer controls abrasive flow and blast wheel motor.
Air Requirements:

90 - 110 PSI required to operate abrasive valve, door and optional dust collector automatic blow down.

Electric Motors: All motors are totally enclosed and fan cooled to provide maximum life.
Blast Motors: 10 HP, 3600 RPM
Mill Drive: 1/2 HP, 1800 RPM
Elevator Drive: 3/4 HP, 1800 RPM
Optional Dust Collector: 2 HP, 3600 RPM

Abrasive Recycling System

Elevator: Dust-tight, centrifugal discharge belt and bucket elevator with removable service and inspection cover. Screw adjusted take-up for positive belt adjustment and unique lip separator that filters the abrasive by eliminating light contaminants and unusable abrasive.
Abrasive Screening: Abrasive screening in cabinet eliminates tramp metal from entering blast wheel.
Abrasive Control: Totally enclosed, fully adjustable butterfly valve, quietly and precisely controls abrasive flow.
Abrasive Required:

400 pounds for initial start-up.

Dust Collector Requirement: 800 CFM, self-contained, self-cleaning, 6-cartridge dust collector.

Safety and Structure

Safety: Blast wheel operates only if door is closed. Chain drive is fully guarded.
Noise Level: Less than 80 DB
Shipping Weight: 2,500 pounds
Machine Dimensions: 57 1/2" wide x 57 1/4" deep x 106" tall

Additional customization is available to fit specific requirements.