50 Years Experience

Toll Free: 877-659-8040
Phone: 918-486-8411
Fax: 918-486-8412
Email: coyotesales@tulsacoxmail.com                                             Find us on Facebook

27301 E 121ST Street
Coweta, OK 74429 USA
Made in America Coyote-logo Coyote-logo-2

 

 

 

 

 

Parts and Machinery for the Abrasive Blast Industry

6 Cubic Foot Airless Blast Machine

 6 cubic foot airless blast machine

Features:

  • 800 LB. Load Capacity
  • 15 HP Direct Drive Blast Wheel
  • Small Operating Footprint
  • 3 Phase Operation
  • Continuous Molded Rubber Belt
  • Low Noise Level
  • Safety Interlocks
  • Reversing Mill
  • Automatic Timer Controls
  • Lip Separator
  • Machine Warranty
  • Standard Color is Coyote

Coyote Centrifugal Blast Wheel

Wheel: 3600 RPM, 14" or 15" direct drive, bi-directional blast wheel for maximum abrasive velocity and smooth operation.
Blades: Exclusive Rim-Loc design ensures easy replacement of long life, abrasive resistant, alloy blades.
Control Cage: Dial type cage.
Wheel Housing: Fabricated from 1/4" steel plate and protected by replaceable cast alloy steel liners.

Cabinet Construction

Cabinet: Low profile, formed to maintain structural integrity and fabricated from 3/8"steel plate; access holes in sides of cabinet simplify belt replacement and rear access door permits easy removal of tramp metal from screens.
Conveyor: 4-ply construction, continuous molded rubber tumble belt with 1/4" diameter abrasive drain holes. Rubber tumbling ridges are molded directly onto the belt, screw adjusted take-ups provide positive belt adjustment.
Conveyor Rollers: Rollers have 2" diameter solid shafts and are mounted to the cabinet with standard (4) bolt flange bearings.
Conveyor Speed: 10 feet per minute.
Work Loading Height: 40 3/4"
Work Load Capacity: 37" x 27 1/2" diameter mill will handle 6 cubic feet or 800 pounds.
Cabinet Door: Pneumatically operated, reinforced rubber door provides full access to blast chamber and is positively sealed from abrasive and dust leakage.

Power and Air Requirements

Nema: Type 12 electrical enclosure, optional 230 or 460 volt, 3 phase, thermal overload protection for all motors, Ammeter, oil tight push button controls and digital timer controls abrasive flow and blast wheel motor.
Air Requirement: 90 - 110 PSI required to operate abrasive valve, door and optional dust collector automatic blow down.
Electric Motors: All motors are totally enclosed and fan cooled to provide maximum life.
Blast Motor: 15 HP, 3600 RPM
Mill Drive: 1/2 HP, 1800 RPM
Elevator Drive: 3/4 HP, 1800 RPM
Optional Dust Collector: 2 HP, 3600 RPM

Abrasive Recycling System

Elevator: Dust-tight, centrifugal discharge belt and bucket elevator with removable service and inspection cover. Screw adjusted take-up for positive belt adjustment and gravity lip separator that filters the abrasive by eliminating light contminants and unusable abrasive.
Abrasive Screening: Abrasive screening in cabinet eliminates tramp metal from entering blast wheel.
Abrasive Control: Totally enclosed, fully adjustable butterfly valve, quietly and precisely controls abrasive flow.
Abrasive Required: 500 pounds for initial start-up.
Separator: Gravity lip separator has adjustable abrasive spreader and precisely controlled refuse gate for maximum contaminate removal.
Dust Collector Requirement: 800 CFM, self-contained, self-cleaning, 6-cartridge dust collector.

Safety and Structure

Safety: Blast wheel operated only if door is closed. All drives are fully guarded.
Noise Level: Less than 80 DB
Shipping Weight:

4,000 pounds

Machine Dimensions: 65" wide x 64 3/4" deep x 12' 4" tall

Additional customization is available to fit specific requirements.